Netgear EX3700 Setup | AC750 via wps

  • Switch on the Netgear EX3700 Setup
  • Connect your extender to a power outlet before you’re out.
  • Wait for the Power LED on the EX3700 to turn green.
  • Click the WPS button on the extender.

The relation between your router and extender is fine if the Netgear EX3700 Link Status LED lights white.

Note: If your extender fails to connect to the router’s 5 GHz band for the first time, it can trigger a slew of issues during the Netgear AC750 WiFi range extender setup. Please contact us as soon as possible if you have any questions or concerns.

  1. Adjust your extender’s location.
  2. Bring your WiFi-enabled computer or mobile device to a location with limited WiFi router coverage.
  3. Enter the expanded network using a WiFi-enabled computer or mobile device.
  4. That’s how you finish your Netgear EX3700 setup with the WPS button.

Netgear WiFi Extender EX3700 Setup| AC750 

Common Setup Issues

  • is currently unavailable.
  • The password for mywifiext is wrong.
  • When the WiFi extender is attached, there is no internet connection.
  • I can’t seem to bind to mywifiext.local.
  • The Netgear genie software isn’t working properly.
  • Accessing the IP address is problematic.
  • The setup CD had gone missing.
  • Wi-Fi security issues
  • The Netgear genie smart configuration page appears even after the Netgear WiFi extender EX3700 is set up.
  • Have you forgotten your Netgear extender’s default password?
  • Extender’s LED lights aren’t always accurate.
  • Your Netgear EX3700 router cannot be set up using
  • My Netgear EX3700 extender won’t let me log in.
  • The internet connection on the EX3700 is lost.
  • My Netgear router’s firmware cannot be upgraded.
  • I’m unable to reach after upgrading the EX3700.
  • MAC address filtering errors
  • The EX3700 is not in use.
  • The name of the Netgear range extender network has been forgotten.
  • Netgear’s Extender isn’t working.
  • On the Netgear EX3700, there is no internet.
  • The red light on my Netgear extender is causing me problems.
  • While there is internet connectivity, it is not operational.
  • You will be able to address all of these issues in a limited period of time by contacting our experts.

Netgear Extender EX3700 Setup| AC750 

Troubleshooting Suggestions

Follow the troubleshooting steps below to fix Netgear extender EX3700 setup issues:

  • Examine the wall outlet to see whether the Netgear AC750 EX3700 extender is receiving enough fuel.
  • Examine the wall plug where the extender is connected to see whether it is damaged or short-circuited.
  • Link your laptop to a high-speed internet connection. 
  • Make sure that all of the wired connections are functional. Avoid using any cable that has been tampered with.
  • Keep your extender away from metal objects, aluminum studs, and other potential sources of interference, such as doors, room corners, microwave ovens, fish tanks, cordless phones, Bluetooth devices, metal products, and other potential sources of interference.
  • If you’re having problems with, double-check that the URL in the address bar is right.
  • After a power loop, restart your Netgear AC750 EX3700 and try to set it up again.
  • Using the most updated version of your web browser to log in to
  • Your extender’s Netgear firmware should be updated to the most current version.
  • Restore the factory default settings on the Netgear AC750 EX3700 extender.
  • Firmware for the Netgear AC750 router.
  • You should upgrade the firmware after you’ve set up your EX3700.

Netgear Extender EX3700 Setup| AC750 firmware update

Is your WiFi extender behaving oddly lately? Is it not providing the necessary speed even after a good Netgear AC750 WiFi extender setup? If this is the case, you can update the firmware on your Netgear extender as soon as possible. Firmware is a collection of instructions incorporated into the hardware of the Netgear Extender. In layman’s terms, Netgear extender firmware is an operating system designed to run on the same make and model of extender that you have. As a result, make sure your Netgear AC750 firmware is up to date. Here’s how to upgrade the firmware on your Netgear range extender:

  • Switch on your Netgear AC750 EX3700 WiFi extender to get started.
  • Connect your router to the extender.
  • Open your favourite web browser after that.
  • Sign in to your extender using the username and password.
  • To upgrade the firmware, go to the configuration menu and select Firmware Update.
  • Then, on the next screen, press the Check button.
  • Allow time for the Netgear EX3700 firmware to be updated properly.

Leave a Reply

Your email address will not be published. Required fields are marked *